Power Plant Flue Gas Desulfurization Hydrocyclone

Wet flue gas desulfurization is the world's most widely used to power plant and most mature one flue gas desulphurization technology. A complete desulfurization systems typically use three different effects to the hydrocyclone:     
1, limestone grading hydrocyclone   
Limestone as desulfurizer, before entering the desulfurization tower, passes through closed-circuit grinding classification, and usually require the fineness of 325 mesh content is more than 90%.Jinyang company dedicated classifying cyclone limestone have continuous and stable work, fine particle classification, high classification efficiency, lined with corrosion resistant long life characteristics.
2, gypsum desulfurization station
     Flue gas desulfurization, either using gypsum, ammonia or calcium - sodium double alkali, its desulfurization product to be continuous through the concentrate from the system, separated and filtered. Commonly used cyclone and belt filter or a centrifuge joint operation, to give a dry heap solid product.Jinyang company's gypsum cyclone in dealing with different desulfurization products, according to the feed particle size distribution, the general design of the separation size of 20 or less than 20 microns in feed concentration of 5-20%, the underflow solids concentration of up to 40-60%, the overflow concentration of up to 2-5%. With a high concentration efficiency, end abortion rate is high, lined with wear and corrosion resistance, long life characteristics.
3, wastewater cyclone staition
Isolated from the desulfurization system of waste water treated with concentrated, to meet the demand of the subsequent wastewater treatment system. As the company's waste water in concentrated hydrocyclone feeding concentration, 3-5% of the underflow concentration is greater than 12-15%, the overflow concentration of 1-3%.