2016年6月28日星期二
Dry tailings discharge equipment: Efficient Dewatering Hydrocyclone Supplier
Dry tailings discharge equipment: Efficient Dewatering Hydrocyclone Supplier: Jinyang efficient dewatering hydrocyclone is suitable for dewatering of various mineral slurry.jinyang can make different design depend on d...
Efficient Dewatering Hydrocyclone Supplier
Jinyang efficient dewatering hydrocyclone is suitable for dewatering of various mineral slurry.jinyang can make different design depend on different characteristics of the materials.It has the advantages of low pressure,large capacity and high dewatering efficiency.
Jinyang efficient dewatering hydrocyclone applied to the re-election of iron ore tailings dewatering operations,while the density of tailings is 5-12%,particle size,P75% below 74μm,the avarage density of overflow from hydrocyclone could be controled below1.5%,Not only effectively dewatering but also avoid the lost of the useful minerals.In the application of a silica mine dewatering operations,the density of the overflow achieved 0.5%,and the overflow is almost unqulified fine mud,achieved the double effect of dehydration and desliming.The water of cyclone overflow can be reuse after settlement.
Jinyang efficient dewatering hydrocyclone applied to the re-election of iron ore tailings dewatering operations,while the density of tailings is 5-12%,particle size,P75% below 74μm,the avarage density of overflow from hydrocyclone could be controled below1.5%,Not only effectively dewatering but also avoid the lost of the useful minerals.In the application of a silica mine dewatering operations,the density of the overflow achieved 0.5%,and the overflow is almost unqulified fine mud,achieved the double effect of dehydration and desliming.The water of cyclone overflow can be reuse after settlement.
 |
| Jinyang efficient dewatering hydrocyclone |
2016年6月22日星期三
Power plant flue gas desulphurization hydrocyclone
Power plant flue gas desulphurization hydrocyclone
Currently, Flue Gas Desulfurization(FGD) is the most widely adopted and most mature technology in coal-fired power plants of the world. Generally, a complete set of desulfurization system will use three kinds of hydrocyclones with different roles.
Limestone classification hydrocyclone
As desulfurizer, before the limestone enters into the tower, it needs to pass through the closed-circuit grinding classification . Generally, its fineness -325 mesh content requires more than 90%. The dedicated limestone classification hydrocyclone produced by Jinyang has the characteristics of continuous and stable work condition, fine classification particle size , efficient classification ,wear and corrosion resistance inner and long service life.
Gypsum hydrocyclone
Whether it adopts gypsum, ammonia or calcium-sodium double alkali, the product after desulfurization needs to be concentrated, filtered and then separated continuously from the system. Commonly ,combining the hydrocyclone with the belt filter or centrifuge can get a dry heap of solid productAccording to the distribution of feed particle size , when Jinyang gypsum hydrocyclone processes different desulfurization products, the general design separation size is 20 or less than 20 microns. When the feed concentration is 5-20%,the underflow concentration can reach 40-60%,the overflow concentration can reach 2-5%. It has characteristics of efficient concentration ,high underflow production rate ,wear and corrosion resistance inner and long service life.
Waste water hydrocyclone
Part of the waste water separated from the desulfurization system needs to be concentrated to meet the demand of the follow-up waste water system. When the feed concentration of waste water concentration hydrocyclone produced by Jinyang is 3-5%,the underflow concentration is greater than 12-15% and overflow concentration is of 1-3%.
Currently, Flue Gas Desulfurization(FGD) is the most widely adopted and most mature technology in coal-fired power plants of the world. Generally, a complete set of desulfurization system will use three kinds of hydrocyclones with different roles.
Limestone classification hydrocyclone
As desulfurizer, before the limestone enters into the tower, it needs to pass through the closed-circuit grinding classification . Generally, its fineness -325 mesh content requires more than 90%. The dedicated limestone classification hydrocyclone produced by Jinyang has the characteristics of continuous and stable work condition, fine classification particle size , efficient classification ,wear and corrosion resistance inner and long service life.
Gypsum hydrocyclone
Whether it adopts gypsum, ammonia or calcium-sodium double alkali, the product after desulfurization needs to be concentrated, filtered and then separated continuously from the system. Commonly ,combining the hydrocyclone with the belt filter or centrifuge can get a dry heap of solid productAccording to the distribution of feed particle size , when Jinyang gypsum hydrocyclone processes different desulfurization products, the general design separation size is 20 or less than 20 microns. When the feed concentration is 5-20%,the underflow concentration can reach 40-60%,the overflow concentration can reach 2-5%. It has characteristics of efficient concentration ,high underflow production rate ,wear and corrosion resistance inner and long service life.
Waste water hydrocyclone
Part of the waste water separated from the desulfurization system needs to be concentrated to meet the demand of the follow-up waste water system. When the feed concentration of waste water concentration hydrocyclone produced by Jinyang is 3-5%,the underflow concentration is greater than 12-15% and overflow concentration is of 1-3%.
 |
| flue gas desulphurization hydrocyclone |
2016年6月20日星期一
2016年6月14日星期二
Dry tailings discharge equipment: Fine sand recovery equipment
Dry tailings discharge equipment: Fine sand recovery equipment: Fine sand recovery equipment working principle 1 structure:a motor,sand pump,centrifugal separator(hydrocyclone).TS linear dewatering scr...
Fine sand recovery equipment
Fine sand recovery equipment working principle
1 structure:a motor,sand pump,centrifugal separator(hydrocyclone).TS linear dewatering screen,cleaning tank,recycle boxes and other components,
2 working process:
Pumped sand water mixture is delivered to centrifugal separator.after centrifuge classification,concentrated fine sand discharged by underflow spigot into the dewatering screen,After the vibration sieve dewatering, fine sand and water separation, a small amount of fine sand, mud and so on return to the tank and then return to the cleaning tank, while the cleaning tank level is too high, discharged through the discharge port.Linear dewatering screen recyclables by weight concentration of 70% -85%. The fineness modulus can be adjusted by changing the pump speed, changing mortar try,adjusting the overflow of water and replacing the undderflow exit.So as to complete the cleaning, dehydration and grading of three kinds of functions.
Fine sand recovery device can decompose water sand mixture reasonably, realize the sand recycling project. can recycle 95% fine particles of the total slurry,fine sand recovery equipment with unparalleled technical and economic advantages.
Case
One company in laizhou shandong province plans to make construction sand with gold tailings,capacity 300t/d,ordered Jinyang fine sand recovery equipment.its sand density is 25%,after processed by fine sand recovery machine(hydrocyclone+dewatering screen),they get the sand with moisture below 18%,which can meet the requiement for construction sand.
1 structure:a motor,sand pump,centrifugal separator(hydrocyclone).TS linear dewatering screen,cleaning tank,recycle boxes and other components,
2 working process:
Pumped sand water mixture is delivered to centrifugal separator.after centrifuge classification,concentrated fine sand discharged by underflow spigot into the dewatering screen,After the vibration sieve dewatering, fine sand and water separation, a small amount of fine sand, mud and so on return to the tank and then return to the cleaning tank, while the cleaning tank level is too high, discharged through the discharge port.Linear dewatering screen recyclables by weight concentration of 70% -85%. The fineness modulus can be adjusted by changing the pump speed, changing mortar try,adjusting the overflow of water and replacing the undderflow exit.So as to complete the cleaning, dehydration and grading of three kinds of functions.
 |
| Fine sand recovery craft |
 |
| Fine sand recovery equipment |
Fine sand recovery device can decompose water sand mixture reasonably, realize the sand recycling project. can recycle 95% fine particles of the total slurry,fine sand recovery equipment with unparalleled technical and economic advantages.
Case
One company in laizhou shandong province plans to make construction sand with gold tailings,capacity 300t/d,ordered Jinyang fine sand recovery equipment.its sand density is 25%,after processed by fine sand recovery machine(hydrocyclone+dewatering screen),they get the sand with moisture below 18%,which can meet the requiement for construction sand.
2016年6月7日星期二
Dry tailings discharge equipment: Fine Sand Recovery Equipment Supplier
Dry tailings discharge equipment: Fine Sand Recovery Equipment Supplier: Fine sand recovery device can be used for ceramic raw materials processing system of dehydration step,concentrator tailings recycling,quartz...
Fine Sand Recovery Equipment Supplier
Fine sand recovery device can be used for ceramic raw materials processing system of dehydration step,concentrator tailings recycling,quartz sand processing system,hydropower station sand and gravel processing system and so on.Jinyang fine sand recovery equipment can effectivly solve the sand and fine material recycling.
The existing artificial sand production line currently,mostly adpots wet production process,no matter what form of sand washing machine,the biggest drawback is fine sand(smaller than 0.16MM)lost seriousely.even lost more than 25%.This is not only a serious loss but also seruousely affect the sand gradation,resulting in unreasonable gradation,fineness modulus of coarse,greatly reducing the quality of the product of the mechanism of sand.Too much fine sand emissions but also cause enviromental pollution.
In order to slove the above problems,Jinyang company has successfully developed a fine sand recycling device,the sand recycling system is the company absorbing foreign advanced technology, is designed by combining the actual situation of silty sand with advanced level of fine material extraction device, widely used in Hydropower Station gravel aggregate processing system, glass raw material processing system, artificial system sand making line, coal preparation plant coarse slime recovery and environmental protection engineering (mud purification), effectively solve the problem of fine sand recovery.
订阅：
博文 (Atom)