Yantai Jinyang hydrocyclone design and characteristics

Yantai Jinyang hydrocyclone is applicable to solid slurry particle classification, concentration, dehydration, desliming operation, specifically for mill closed-circuit grinding classification, underground filling, tailings dry and tailings DAMS of dehydration concentrate, powder preparation, environmental protection, such as waste water purification processing operations.

Yantai Jinyang hydrocyclone design and characteristics
1 According to the different working conditions, the cut in the form of feed line of the cyclone feeding type, involute feeding, screw linear feeding. The three-dimensional spiral linear feeding way under the same working conditions with low pressure, large capacity, and has won the national patent.
2 Feeding tubes rectangular tapered tube, in order to gradually increase the feed slurry flow rate, and the coarse particles in the feed process, from turbulent to laminar flow over, the thickness of the material to achieve the initial separation, improve cyclone classification accuracy.
3 Thick-walled overflow tube feeding reduce the adverse effects of turbulence due to a sudden increase in volume caused by dirty and the cover of the grading process, while reducing energy losses steering material is conducive to classification efficiency.
4 Cyclone histogram length according to different working conditions and work results cyclone user requirements, can optionally be adjusted to ensure optimal working condition of the cyclone.
5 Overall structural design of the cyclone, with different taper ratio and ratio pyramid, to ensure maximum cutting inside the cyclone slurry velocity, the ability to reduce the loss, get the best grade concentrated effect. Using the technology, in the same working conditions to achieve the same grading effect, it can be used instead of the large-diameter cyclone many small diameter cyclones to save the user's investment.
6 Cyclone lining wear-resisting layer respectively according to different material properties and working conditions using corundum, high wear-resisting rubber, composite ceramic, KM ceramic composite materials, polyurethane, etc. Can also according to the need, the parts of the structure for hydrocyclone to wear resistance requirements, in the different parts of a hydrocyclone using different material wear-resisting lining, in order to increase the overall service life of cyclone. Longer at the same time maintain a cyclone the shape and size of the internal flow path, to maintain the stability of classification efficiency and classifying precision.