2016年3月17日星期四
Dry tailings discharge equipment: Dry Stacking of Mining Tailings Equipment Supplier...
Dry tailings discharge equipment: Dry Stacking of Mining Tailings Equipment Supplier...: As a professional dry stacking of mining tailings equipment supplier Jinyang produce several proposals here: 1 Thickener+press filter Th...
Dry Stacking of Mining Tailings Equipment Supplier
As a professional dry stacking of mining tailings equipment supplier Jinyang produce several proposals here:
1 Thickener+press filter
This craft with the combination of equipment system is suitable for medium and fine grade material.in slurry partical size-0.0037mm accounted for 95% can still be used,the dry product moisture of 15%-25%.
The process equipment combination system discharging discontinuity, for some process may require setting the buffer device.
2 Hydrocyclone+High Frenquency Dewatering screen+Thickener
The composition is suitable for all minerals at -325 mesh accounted for 80% .This proposal has characteristic of small investment and low cost,it in only half cost of filt press,and without quick wear part.
In addition,for the very fine grained minerals,also can use combination process thickener+high frequency vibration dewatering screen+filter press,can complete dewatering engineering.
1 Thickener+press filter
This craft with the combination of equipment system is suitable for medium and fine grade material.in slurry partical size-0.0037mm accounted for 95% can still be used,the dry product moisture of 15%-25%.
The process equipment combination system discharging discontinuity, for some process may require setting the buffer device.
Dry Stacking of Tailings |
2 Hydrocyclone+High Frenquency Dewatering screen+Thickener
The composition is suitable for all minerals at -325 mesh accounted for 80% .This proposal has characteristic of small investment and low cost,it in only half cost of filt press,and without quick wear part.
In addition,for the very fine grained minerals,also can use combination process thickener+high frequency vibration dewatering screen+filter press,can complete dewatering engineering.
2016年3月7日星期一
2016年3月2日星期三
Dry tailings discharge equipment: Hydrocyclone Manufacturers
Dry tailings discharge equipment: Hydrocyclone Manufacturers: Yantai Jinyang hydrocyclone company was founded in 2003,with rich experience in producing hydrocyclones.It is a proffessional hydrocyclone m...
Hydrocyclone Manufacturers
Yantai Jinyang hydrocyclone company was founded in 2003,with rich experience in producing hydrocyclones.It is a proffessional hydrocyclone manufacturer in China.
According to use classification,Jinyang can offer grading cyclone,high fineness classifying hydrocyclone,efficient classifying hydrocyclone,efficient dewatering hydrocyclone,efficient concentration hydrocyclone,tailings filling and daming hydrocyclone,efficient desliming hydrocyclone,Power plant flue gas desulphurization hydrocyclone.
According linning material,Jinyang can offer polyurethane hydrocyclone,high wear-resisting rubber hydrocyclone and corundum ceramics lining hydrocyclone.
The polyurethane hydrocyclone produced by Yantai Jinyang hydrocyclone Co.,Ltd has characteristics of high wear resisitance ,high strength ,light weight and long service life .It's made by pouring solidification ,especially applicable for the medium-fine particles .According to the customers' use and work requirements ,specification from 100mm to 610mm.
The hydrocyclone's liner adopts high wear-resisting rubber that is made of unique formula technology called "liquid formula, room temperature curing",it has excellent flexibility and strong wear-resistance. The hydrocycyclone produced by mould pressing can replace the bushing,once it's worn and teared,it can be easily replaced, and save cost.hydrocyclone can be produced according to the customers' use and work requirements.
95 microlite corundum ceramics is by dry pressing molding, 1500 ℃ high temperature roasting of special wear-resisting ceramics, its mohs hardness is 9, hardness is second only to diamond.
Yantai Jinyang cyclone production high wear-resisting lining cyclone fused with 95 microcrystalline alumina lining materials, has high hardness, wear resistance, impact resistance, heat resistance, acid and alkali corrosion resistance and other characteristics, the actual service life is six times more than polyurethane, especially used in strong corrosion, the coarse particle materials classification, concentration, dehydration and other operations, has been successfully used in several mines.
Corundum lining cyclone specifications: Φ200, Φ250, Φ300, Φ350, Φ300,Φ 610, Φ660, Φ750 and so on the many kinds of specifications.
Contact Email ytjinyang2003@gmail.com
Tel:0086 0535 6520728
Web:www.hydrocyclonechina.com
According to use classification,Jinyang can offer grading cyclone,high fineness classifying hydrocyclone,efficient classifying hydrocyclone,efficient dewatering hydrocyclone,efficient concentration hydrocyclone,tailings filling and daming hydrocyclone,efficient desliming hydrocyclone,Power plant flue gas desulphurization hydrocyclone.
efficient classifying hydrocyclone |
Power plant flue gas desulphurization hydrocyclone |
efficient dewatering hydrocyclone |
high fineness classifying hydrocyclone |
grading cyclone |
efficient concentration hydrocyclone |
According linning material,Jinyang can offer polyurethane hydrocyclone,high wear-resisting rubber hydrocyclone and corundum ceramics lining hydrocyclone.
polyurethane hydrocyclone |
The polyurethane hydrocyclone produced by Yantai Jinyang hydrocyclone Co.,Ltd has characteristics of high wear resisitance ,high strength ,light weight and long service life .It's made by pouring solidification ,especially applicable for the medium-fine particles .According to the customers' use and work requirements ,specification from 100mm to 610mm.
high wear-resisting rubber hydrocyclone |
The hydrocyclone's liner adopts high wear-resisting rubber that is made of unique formula technology called "liquid formula, room temperature curing",it has excellent flexibility and strong wear-resistance. The hydrocycyclone produced by mould pressing can replace the bushing,once it's worn and teared,it can be easily replaced, and save cost.hydrocyclone can be produced according to the customers' use and work requirements.
corundum ceramics lining hydrocyclone |
95 microlite corundum ceramics is by dry pressing molding, 1500 ℃ high temperature roasting of special wear-resisting ceramics, its mohs hardness is 9, hardness is second only to diamond.
Yantai Jinyang cyclone production high wear-resisting lining cyclone fused with 95 microcrystalline alumina lining materials, has high hardness, wear resistance, impact resistance, heat resistance, acid and alkali corrosion resistance and other characteristics, the actual service life is six times more than polyurethane, especially used in strong corrosion, the coarse particle materials classification, concentration, dehydration and other operations, has been successfully used in several mines.
Corundum lining cyclone specifications: Φ200, Φ250, Φ300, Φ350, Φ300,Φ 610, Φ660, Φ750 and so on the many kinds of specifications.
Contact Email ytjinyang2003@gmail.com
Tel:0086 0535 6520728
Web:www.hydrocyclonechina.com
订阅:
博文 (Atom)