2016年9月28日星期三
Dry tailings discharge equipment: DW21 High frequency vibrating dewatering screen
Dry tailings discharge equipment: DW21 High frequency vibrating dewatering screen: Characteristic of DW21 high frequency vibrating dewatering screen 1The structure of vibrating dewatering screen body adopts rivit conecti...
DW21 High frequency vibrating dewatering screen
Characteristic of DW21 high frequency vibrating dewatering screen
1The structure of vibrating dewatering screen body adopts rivit conecting which improved overall rigidity, increase of service life.
2 the surface of screen use polyurenthane plate,they are connected with track for easy installation and replacement,five times abradability higher than the conventional metal screen,feeding material is evenly distributed, seive mesh is not easy to jam ,and the processing capacity is large.
3Increased the quantity of beams and the diameter of driving beams ,also increase of sevice life.
4According to the feeding amount ,adjust the amplitude to meet the process requirement.
5 Motor Power 7.5*2KW
6 Sieve area2100mm*4200mm
7Processing capacity 40-80t/d/set
8Weight 5.7 t/set
1The structure of vibrating dewatering screen body adopts rivit conecting which improved overall rigidity, increase of service life.
2 the surface of screen use polyurenthane plate,they are connected with track for easy installation and replacement,five times abradability higher than the conventional metal screen,feeding material is evenly distributed, seive mesh is not easy to jam ,and the processing capacity is large.
3Increased the quantity of beams and the diameter of driving beams ,also increase of sevice life.
4According to the feeding amount ,adjust the amplitude to meet the process requirement.
5 Motor Power 7.5*2KW
6 Sieve area2100mm*4200mm
7Processing capacity 40-80t/d/set
8Weight 5.7 t/set
 |
| DW21 high frequency vibrating dewatering screen |
2016年9月26日星期一
Dry tailings discharge equipment: DW24 High frequency vibrating dewatering screen
Dry tailings discharge equipment: DW24 High frequency vibrating dewatering screen: Characteristic of DW24 high frequency vibrating dewatering screen 1The structure of vibrating dewatering screen body adopts rivit conectin...
DW24 High frequency vibrating dewatering screen
Characteristic of DW24 high frequency vibrating dewatering screen
1The structure of vibrating dewatering screen body adopts rivit conecting which improved overall rigidity, increase of service life.
2 the surface of screen use polyurenthane plate,they are connected with track for easy installation and replacement,five times abradability higher than the conventional metal screen,feeding material is evenly distributed, seive mesh is not easy to jam ,and the processing capacity is large.
3Increased the quantity of beams and the diameter of driving beams ,also increase of sevice life.
4According to the feeding amount ,adjust the amplitude to meet the process requirement.
5 Motor Power 11*2KW
6 Sieve area2400mm*4200mm
7Processing capacity 50-100t/d/set
8Weight 5.8t/set
1The structure of vibrating dewatering screen body adopts rivit conecting which improved overall rigidity, increase of service life.
2 the surface of screen use polyurenthane plate,they are connected with track for easy installation and replacement,five times abradability higher than the conventional metal screen,feeding material is evenly distributed, seive mesh is not easy to jam ,and the processing capacity is large.
3Increased the quantity of beams and the diameter of driving beams ,also increase of sevice life.
4According to the feeding amount ,adjust the amplitude to meet the process requirement.
5 Motor Power 11*2KW
6 Sieve area2400mm*4200mm
7Processing capacity 50-100t/d/set
8Weight 5.8t/set
 |
| DW24 Vibrating screen |
 |
| DW24 vibrating dewatering screen side |
2016年9月22日星期四
Dry tailings discharge equipment: Hydrocyclone separators
Dry tailings discharge equipment: Hydrocyclone separators: Hydrocyclone separators widely applied in mine-chosen technique in various metal mines. It mainly shows in the following works: 1. Class...
2016年9月21日星期三
Hydrocyclone separators
Hydrocyclone separators widely applied in mine-chosen technique in various metal mines.
It mainly shows in the following works:
1. Classification for section I closed circuit grinding
2. Classification for section II closed circuit grinding
3. Regrinding for fine mine classification
4. Mud-removing before selection and after selection
Dam and backfill for gangueIn closed circuit grinding system, it features high classification efficiency and fine overfall fineness under high mine concentration.
Classification efficiency is higher for 5-10% than common screw grader. It benefits for enhancing grader utilizing coefficient.Choose proper specification and mode of cyclone
according to grinding processing capacity, overfall fineness and sedimentation concentration.
This is precondition of getting the most optimized work condition.
Our company is able to offer stand-alone, parallel connection machine or machine series in such specs as Φ75, Φ100, Φ125, Φ150, Φ200, Φ250, Φ300, Φ350, Φ500,Φ610,Φ660 and Φ750.Fine sand, less than 37μm, in gangue can not be used as dam materials during selecting mine. After the classification by cyclone, coarse granule left in the bottom of dam, fine granule move to the tail of gangue. Fine granule graded naturally during the movement. There is section full of clean water, which can be used for calling back of water. In the process of filling tail, we utilize cyclone for grading and concentrating to separate coarse granule so that to reduce load of filtering machine and to reach at the best effect. Use cyclone to finish dam and filling work so that to solve problems such as leaking mine, sink and overproof water discharged. So it can receive obvious economic and social benefit.
It mainly shows in the following works:
1. Classification for section I closed circuit grinding
2. Classification for section II closed circuit grinding
3. Regrinding for fine mine classification
4. Mud-removing before selection and after selection
Dam and backfill for gangueIn closed circuit grinding system, it features high classification efficiency and fine overfall fineness under high mine concentration.
Classification efficiency is higher for 5-10% than common screw grader. It benefits for enhancing grader utilizing coefficient.Choose proper specification and mode of cyclone
according to grinding processing capacity, overfall fineness and sedimentation concentration.
This is precondition of getting the most optimized work condition.
Our company is able to offer stand-alone, parallel connection machine or machine series in such specs as Φ75, Φ100, Φ125, Φ150, Φ200, Φ250, Φ300, Φ350, Φ500,Φ610,Φ660 and Φ750.Fine sand, less than 37μm, in gangue can not be used as dam materials during selecting mine. After the classification by cyclone, coarse granule left in the bottom of dam, fine granule move to the tail of gangue. Fine granule graded naturally during the movement. There is section full of clean water, which can be used for calling back of water. In the process of filling tail, we utilize cyclone for grading and concentrating to separate coarse granule so that to reduce load of filtering machine and to reach at the best effect. Use cyclone to finish dam and filling work so that to solve problems such as leaking mine, sink and overproof water discharged. So it can receive obvious economic and social benefit.
2016年9月19日星期一
Dry tailings discharge equipment: Linear Dewatering Screen for Sand Grading/Fine San...
Dry tailings discharge equipment: Linear Dewatering Screen for Sand Grading/Fine San...: Fine sand recovery equipment can be used for ceramic raw materials processing system of dehydration step,concentrator tailings recycling,qua...
Linear Dewatering Screen for Sand Grading/Fine Sand Recovery Equipment
Fine sand recovery equipment can be used for ceramic raw materials processing system of dehydration step,concentrator tailings recycling,quartz sand processing system,hydropower station sand and gravel processing system and so on.Jinyang fine sand recovery equipment can effectivly solve the sand and fine material recycling.
The existing artificial sand production line currently,mostly adpots wet production process,no matter what form of sand washing machine,the biggest drawback is fine sand(smaller than 0.16MM)lost seriousely.even lost more than 25%.This is not only a serious loss but also seruousely affect the sand gradation,resulting in unreasonable gradation,fineness modulus of coarse,greatly reducing the quality of the product of the mechanism of sand.Too much fine sand emissions but also cause enviromental pollution.
In order to slove the above problems,Jinyang company has successfully developed a fine sand recycling device effectively solve the problem of fine sand recovery.
Fine sand recovery equipment working principle
1 structure:a motor,sand pump,centrifugal separator(hydrocyclone). linear dewatering screen,cleaning tank,recycle boxes and other components,
2 working process:
Pumped sand water mixture is delivered to centrifugal separator.after centrifuge classification,concentrated fine sand discharged by underflow spigot into the dewatering screen,After the vibration sieve dewatering, fine sand and water separation, a small amount of fine sand, mud and so on return to the tank and then return to the cleaning
tank, while the cleaning tank level is too high, discharged through the discharge port.
Linear dewatering screen recyclables by weight concentration of 70% -85%. The fineness modulus can be adjusted by changing the pump speed, changing mortar try,adjusting the overflow of water and replacing the undderflow exit.So as to complete the cleaning, dehydration and grading of three kinds of functions.
Fine sand recovery device can decompose water sand mixture reasonably, realize the sand recycling project. can recycle 95% fine particles of the total slurry,fine sand recovery equipment with unparalleled technical and economic advantages.
Case
One company in laizhou shandong province plans to make construction sand with gold
tailings,capacity 300t/d,ordered Jinyang fine sand recovery equipment.its sand density is
25%,after processed by fine sand recovery machine(hydrocyclone+dewatering screen),they get the sand with moisture below 18%,which can meet the requiement for construction sand.
The existing artificial sand production line currently,mostly adpots wet production process,no matter what form of sand washing machine,the biggest drawback is fine sand(smaller than 0.16MM)lost seriousely.even lost more than 25%.This is not only a serious loss but also seruousely affect the sand gradation,resulting in unreasonable gradation,fineness modulus of coarse,greatly reducing the quality of the product of the mechanism of sand.Too much fine sand emissions but also cause enviromental pollution.
In order to slove the above problems,Jinyang company has successfully developed a fine sand recycling device effectively solve the problem of fine sand recovery.
Fine sand recovery equipment working principle
1 structure:a motor,sand pump,centrifugal separator(hydrocyclone). linear dewatering screen,cleaning tank,recycle boxes and other components,
2 working process:
Pumped sand water mixture is delivered to centrifugal separator.after centrifuge classification,concentrated fine sand discharged by underflow spigot into the dewatering screen,After the vibration sieve dewatering, fine sand and water separation, a small amount of fine sand, mud and so on return to the tank and then return to the cleaning
tank, while the cleaning tank level is too high, discharged through the discharge port.
Linear dewatering screen recyclables by weight concentration of 70% -85%. The fineness modulus can be adjusted by changing the pump speed, changing mortar try,adjusting the overflow of water and replacing the undderflow exit.So as to complete the cleaning, dehydration and grading of three kinds of functions.
Fine sand recovery device can decompose water sand mixture reasonably, realize the sand recycling project. can recycle 95% fine particles of the total slurry,fine sand recovery equipment with unparalleled technical and economic advantages.
Case
One company in laizhou shandong province plans to make construction sand with gold
tailings,capacity 300t/d,ordered Jinyang fine sand recovery equipment.its sand density is
25%,after processed by fine sand recovery machine(hydrocyclone+dewatering screen),they get the sand with moisture below 18%,which can meet the requiement for construction sand.
2016年9月12日星期一
Dry tailings discharge equipment: Three way ball valve，taylor valve，Y-ball valve
Dry tailings discharge equipment: Three way ball valve，taylor valve，Y-ball valve: Working principle : Taylor valve (also called three-way valve, slurry commutation check valve and slurry automatic switching valve) has two...
Three way ball valve，taylor valve，Y-ball valve
Working principle :Taylor valve(also called three-way valve, slurry commutation check valve and slurry automatic switching valve) has two imports and one export.When the slurry enters from one import,the other import will be automatically closed.one valve control two pipes.
Slurry flow driving ball into a pipe orifice and close it; slurry pass by another pipe orifice. So it will not cause blockage.
The Y – ball valve relying on the pressure of slurry to change the valve does not need people to control realizing automatic control, simple and flexible. Adopting Y- ball valve realizes pipeline setting of two pumps with one valve.
product feature :
Taylor valve can effectively avoid the deposition of solid ,operate easily and flexibly .The valve inner adopts alumina ceramic or high abrasion rubber,which has features of strong abrasion resistance, durability and long life. it is 3-5 times longer life than usual taylor valves
specifications and models
Jinyang can provide taylor valve with diameter from 50mm to 400mm .
DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN225 DN250 DN275 DN300 DN350 DN400
application range :
It's applicable for slurry pump in occasions of chemical, water supply and drainage, petroleum, power generation, mining and other occasions .
Jinyang is specializing produce hydrocyclone valves. Working pressure is 1MPA.we can make
the flange depend on customer's request.
Contact name vicky Lu
Skype:vicky.lu122
Email:ytjinyang2003@gmail.com
website:www.hydrocyclonechina.com
Slurry flow driving ball into a pipe orifice and close it; slurry pass by another pipe orifice. So it will not cause blockage.
The Y – ball valve relying on the pressure of slurry to change the valve does not need people to control realizing automatic control, simple and flexible. Adopting Y- ball valve realizes pipeline setting of two pumps with one valve.
product feature :
Taylor valve can effectively avoid the deposition of solid ,operate easily and flexibly .The valve inner adopts alumina ceramic or high abrasion rubber,which has features of strong abrasion resistance, durability and long life. it is 3-5 times longer life than usual taylor valves
specifications and models
Jinyang can provide taylor valve with diameter from 50mm to 400mm .
DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN225 DN250 DN275 DN300 DN350 DN400
application range :
It's applicable for slurry pump in occasions of chemical, water supply and drainage, petroleum, power generation, mining and other occasions .
Jinyang is specializing produce hydrocyclone valves. Working pressure is 1MPA.we can make
the flange depend on customer's request.
Contact name vicky Lu
Skype:vicky.lu122
Email:ytjinyang2003@gmail.com
website:www.hydrocyclonechina.com
订阅：
博文 (Atom)